Written by Seth Long, Damp Pro and Co · Last updated: 7 October 2026
Need this sorted?
Need help with damp survey? Get a quote from Damp Pro and Co.
Efflorescence in plain terms
Bricks, mortar, blocks and plaster all contain small amounts of soluble salts. When water soaks into a wall it picks some of them up. As the surface dries, the water leaves as vapour but the salts stay put, building up as a white bloom. The more water that passes through and dries off, the thicker the deposit tends to be.
So the powder itself is rarely the real problem. It is a clue that the wall has been wet at some point, either recently or while it was drying out after building work. The useful question is where that water came from and whether it is still arriving.
Is it efflorescence, mould or something else?
Several different things can leave a pale layer on a wall. Texture, smell and position usually tell them apart before anyone needs a meter.
Efflorescence
Dry and white, either powdery or fine and crystalline, sometimes with fluffy tufts. It brushes off easily, sits on bare brick, mortar joints or plaster, and has no smell. A little dabbed with water will usually dissolve. It often follows a pattern: a band low on the wall, a patch under a sill, or the brickwork around a gutter outlet.
White mould
Soft and fuzzy rather than gritty, and usually growing on wallpaper, paint, timber, carpet edges or stored belongings. It smears instead of crumbling, often comes with a musty smell and favours cold corners or the space behind furniture. Some mould looks white or grey rather than black; our black mould on walls guide covers safe cleaning.
Chalking paint
Older masonry paint can break down in sunlight and weather, leaving a fine powder that rubs off on your fingers in the colour of the paint. It covers the painted area evenly rather than gathering in patches, and it is a decorating matter rather than a sign of damp.
Lime run-off
Hard white streaks or crusts running down from mortar joints, concrete or render can be lime washed out of the cement. These do not brush away like efflorescence, but they still show that water is running through or over the masonry.
Inside or outside: where it appears matters
On external brickwork, efflorescence often shows on newer walls while building moisture dries out, and on older walls where rain keeps soaking one spot, such as under an overflowing gutter, a cracked sill or a leaking downpipe. Our guide to efflorescence on brickwork explains how to read those outside patterns and clean bricks without harming them.
Indoors, a white bloom on plaster is a stronger hint that moisture has been moving through the wall from somewhere. A band low on a ground-floor wall points towards ground moisture and the damp proof course. A patch around a window reveal or on a chimney breast leans more towards rain getting in. Newly applied plaster can also show a short-lived bloom while it dries.
Some salts carried by damp walls go on to attract moisture from the air, so plaster can keep looking damp after the water source has been cured. That is a separate problem, covered in salt on walls. In cellars, white powder usually reflects ground moisture moving through masonry below ground level, which needs looking at with that construction in mind.
A simple check you can do at home
A few minutes of observation gives a surveyor far more to work with than a single close-up photograph.
- Photograph the patch and take a wider shot of the whole wall before touching anything.
- Brush a small area with a dry, soft brush and note whether the residue feels gritty, fuzzy or chalky.
- Measure roughly how high the patch sits and note whether it is near a gutter, pipe, window or chimney.
- Look at the same spot a week or two later, and again after a spell of heavy rain.
- Jot down any recent work, such as fresh plaster, repointing, a new patio or a repaired leak.
How to get rid of white powder on walls
Brush it off dry, inside or out. Choose a brush that suits the surface, collect the powder and bin it rather than letting it drop behind the skirting or into a flower bed. Wear a dust mask if there is a lot to remove.
Avoid scrubbing with water. Wetting the wall redissolves the salts and carries them back in, only for them to reappear once it dries. Strong acid cleaners can mark brick and eat into mortar, so leave those to someone who knows the material.
Hold off decorating for now. Paint applied over efflorescence traps it, and salts pushing through can lift the new finish. Our guide on whether you can paint over damp explains how to tell when a wall is ready.
Brushing only deals with what you can see. If the deposit grows back quickly, the wall is still getting wet, and the fix lies in the gutter, pointing, a bridged damp proof course or a leak. If it fades over a few months on new work and stays away, it may simply have been the building drying out.
When white powder needs a professional look
A survey is worth arranging when the powder keeps coming back, appears alongside damp patches, peeling paint or crumbling plaster, forms a low band along ground-floor walls or turns up after rain. A meter reading alone can mislead here, because salts change the result, so readings need to be weighed against what can be seen inside and outside the house. Our guide to moisture meter readings explains why.
Damp Pro and Co offers homeowners a free, no-obligation damp survey from Ruislip across West London and South Bucks, with an inspection inside and out, moisture readings and an honest recommendation. Where salts have spoiled internal plaster, our pages on rising damp treatment and penetrating damp treatment explain how the cause and the finish are each put right. Book a free damp survey or describe what you have found using the quote form.
Want a professional to handle it?
Arrange a survey to find out what your home needs.
Related services
Covering Ruislip, West London and South Bucks.
Questions about this topic
What is the white powder on my walls?
Most often it is efflorescence: salts left on the surface as water dries out of brick, mortar or plaster. Fuzzy growth with a musty smell is more likely mould, and powder that matches the paint colour is usually chalking.
What causes white powder on walls?
Water moving through the wall and evaporating at the face. That water can come from rain, a leak, ground moisture or a building still drying after work, so the cause is found by tracing the water.
Why does the white powder keep coming back?
Water is still passing through the wall, or the wall is still drying out after earlier wetting. Brushing removes the deposit; stopping the water stops fresh salts forming.
Should I wash white powder off with water?
Dry brushing is usually better. Water can redissolve the salts and draw them back into the wall, so the bloom returns once it dries.
Does white powder mean I have rising damp?
Not on its own. A low band on a ground-floor wall can be one sign, but rain penetration, leaks and new plaster drying out all produce salts too, so a survey looks at the whole pattern.
Related guides
- Efflorescence on brickwork
White deposits on external bricks, repeated wetting and careful surface cleaning.
- Salt on walls
Internal hygroscopic contamination, misleading readings and suitable salt-resistant finishes.
- Moisture meter readings
What electrical wall readings mean and why salts or concealed materials can mislead.

